Contribution of workshop management to students' learning outcomes in vocational high school

Authors

  • Yang Yun Irawan Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia Author
  • Yufrizal A Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia Author
  • Purwantono Purwantono Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia Author
  • Randi Purnama Putra Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia Author

DOI:

https://doi.org/10.24036/MEEJ.v1i1.11989

Keywords:

workshop management, learning outcomes, vocational high school, workshop facilities, machining workshop

Abstract

SMK Negeri 1 Sumatera Barat has workshop facilities that support education, but learning outcomes in using machines for machine work practice are still below the minimum passing grade. The problem lies in the poor management of the machining workshop, such as many appliances that do not function properly, causing students to be hindered in carrying out practical work in the workshop, and equipment shortages with differences in the number of students. This research aims to reveal how workshop management can improve students' learning outcomes. The research used a quantitative descriptive research design. The study population was all 61 students registered in the XI grade of the Mechanical Engineering Program at SMK N 1 Sumatera Barat, with a sample size of 38 students. The variables in this study were workshop management (X) and learning outcomes (Y). Data analysis techniques included descriptive analysis, hypothesis testing, and prerequisite testing. The prerequisite analysis tests were normality and linearity, while hypothesis testing used regression analysis. The results showed that the calculated correlation coefficient (r) was 0.989, with a positive or direct attribute with a significance value of 0.000. This means that the correlation between the two variables is significant at both 0.05 levels. Therefore, the null hypothesis (H0) was rejected, and the alternative hypothesis (H1) was accepted. Although the correlation and contribution levels between workshop management and students' learning outcomes were extreme, they were still below the minimum passing grade.

References

Amri, S., Rifa, A., & Hanif, M. B. (n.d.). Peran Akses E-Skripsi untuk Mahasiswa Universitas Semarang Selama Perkuliahan Online (Daring. Information Science and Library, 1(2), 12–17.

Aziz, A., & Shaleh, M. (n.d.). Variasi Metode Pembelajaran Dan Peningkatan Motivasi Belajar Siswa.

Fahmi, R., Nadya, A., Rizki Adhari, N., & Baynal Hubi, Z. (n.d.). Penguatan Pendidikan Kewarganegaraan Sebagai Upaya Diradikalisasi Generasi Muda. Jurnal Pancasila Dan Kewarganegaraan, 6(2), 33–42. https://doi.org/10.24269/jpk.v6.n2.2021.pp33-42

Fortuna, A., Saputra, A., Ramadhan, A., Prasetya, F., Primawati, P., & Rahmadhani, D. (n.d.). Development of Physics Learning Media Based on Augmented Reality Newton’s Law Material. Seminar Nasional Pendidikan Fisika, VII, 1–8.

Gabriela, N. D. P. (n.d.). Pengaruh Media Pembelajaran Berbasi Audio Visual Terhadap Peningkatan Hasil Belajar Sekolah Dasar. Mahaguru: Jurnal Pendidikan Guru Sekolah Dasar, 2(1), 104–113. https://doi.org/10.33487/mgr.v2i1.1750

Hakim, M. N. (n.d.). Manajemen Hubungan Masyarakat Dalam Mengembangkan Lembaga Pendidikan (Studi Kasus di SMK Negeri 1 Dlanggu Mojokerto. Nidhomul Haq : Jurnal Manajemen Pendidikan Islam, 4(1), 121–139. https://doi.org/10.31538/ndh.v4i1.245

Khoerun, B., Sugara, F., Kurniawan, Y., Sudrajat, J., & Alhafidz, A. (n.d.). Implementasi Trainer Elektronika Dasar Sebagai Media Pembelajaran Program Keahlian Teknik Elektronika Di Smk Negeri 1 Sindang Kabupaten Indramayu. Jurnal Vokasi, 6(3), 243–247.

Krisnandi, D., Fatiha, Z. D., Putra, J. L., Saputra, S. A., & Gata, W. (n.d.). Konsep Finite State Automata Pada Desain Vending Machine Alat Praktik Di Sekolah Menengah Kejuruan. Jurnal Keilmuan Dan Aplikasi Teknik Informatika : Jurnal Explore IT, 13(1), 22–27.

Melianti, E., Handayani, D., Novianti, F., Syahputri, S., & Hasibuan, S. A. (n.d.). Pentingnya Pendidikan Yang Ada di Sekolah Dasar. Jurnal Pendidikan Dan Konseling, 5(1), 3549–3554.

Meria, A. (n.d.). Ekstrakurikuler Dalam Mengembangkan Diri Peserta Didik Di Lembaga Pendidikan. Turast : Jurnal Penelitian Dan Pengabdian, 6(2), 177–188. https://doi.org/10.15548/turast.v6i2.70

Priambudi, P., Mahmudah, F. N., & Susatya, E. (n.d.). Pengelolaan kelas industri di sekolah menengah kejuruan. Jurnal Pendidikan Teknologi Kejuruan, 3(2), 87–97.

Tanuwijaya, N. S., & Tambunan, W. (n.d.). Alternatif Solusi Model Pembelajaran Untuk Mengatasi Resiko Penurunan Capaian Belajar Dalam Pembelajaran Tatap Muka Terbatas Di Masa Pandemic Covid 19. Jurnal Manajemen Pendidikan, 10(2), 80–90. https://doi.org/10.33541/jmp.v10i2.3272

Yulius, M. (n.d.). Manajemen Sarana Dan Prasarana Pada SMK Negeri 1 Singkawang. Jurnal Ilmiah Kependidikan, 8(2), 246–255.

Downloads

Published

2024-02-28

Issue

Vol. 1 No. 1 (2024): Volume 1 No 1

Section

Articles

License

Copyright (c) 2024 Yang Yun Irawan, Yufrizal A, Purwantono Purwantono, Randi Purnama Putra (Author)

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

Irawan, Y. Y., A, Y. ., Purwantono, P., & Putra, R. P. . (2024). Contribution of workshop management to students’ learning outcomes in vocational high school. Mechanical Engineering Education Journal , 1(1), 1-8. https://doi.org/10.24036/MEEJ.v1i1.11989