Analysis of job risk at machine workshop

Authors

  • Putra Khairus Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA
  • Eko Indrawan Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA
  • Junil Adri Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA
  • Irzal Irzal Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

DOI:

https://doi.org/10.24036/meej.v1i3.37

Keywords:

Job Risk, Workshop, Vocational

Abstract

This research aims to: (1) Risk opportunities that may occur when students do not comply with Standard Operating Procedures (SOP) and cutting parameters contained in machining work at the National Vocational School Bukit Batu machine workshop. (2) Risk control efforts that can be carried out by workshop management, teachers or school officials so that work accidents do not occur in the Berbah National Vocational School Bukit Batu machine shop. This type of research is descriptive, with a qualitative approach. The research subjects were practical teachers, workshop heads and 22 students of class XI National Vocational School Bukit Batu. The research object is risk opportunities and risk control efforts. Data collection techniques use interviews, observation and documentation. The analysis techniques used are: Data Reduction, Data Presentation and Conclusions.

Downloads

Download data is not yet available.

References

Christopher AP. 2009. Noise Induced Hearing Loss (NIHL) (disertasi). Fakultas Kedokteran Universitas Riau.

Daryanto. (2010). Keselamatan Kerja peralatan Bengkel dan Perawatan Mesin. Bandung:Alfabeta Dwiatmo, Langgeng. 2005. Analisis Gangguan Auditory dan Non Auditory pada Pekerja yang Terpapar Kebisingan di Seksi Tube PT. Surya Raya Rubberino Industries Tahun 2005.Skripsi FKMUI .Depok.

Gunara, Santoso. (2017). Buku Pedoman Pelaksanaaan Keselamatan dan Kesehatan Kerja. Jakarta:Sudirman Central Business District

ILO&IEA(2010).Ergonomic Check Point.Second Edition.Geneva:ILO

ILO. 2013. Health and Safety in Work Place for Productivity. Geneva: International LabourOffice.

Kolluru, R Et al. 1996. Risk Assesment and Management Handbook for Environmentan, Health and Safety Professionals. United States: McGraw-HillInc.

Nur Hidayat dan Indah Wahyuni. (2016). Kajian Keselamatan dan Kesehtan Kerja Bengkel Di Jurusan Pendidikan Teknik Sipil dan Perencanaan Fakultas Teknik UNY. Jurnal Pendidikan Teknologi dan Kejuruan (Volume 23, Nomor1,mei2016).Hlm.51-66.110

Purwanto dan Thomas Sukardi. (2015). Pengelolaan Bengkel Praktik SMK Teknik Pemesinan Di Kabupaten Purworejo. Jurnal Pendidikan Teknologi dan Kejuruan (Volume 22,Nomor 3,Mei 2015).Hlm.292-306.

Putut Hargiyanto. (2011). Analisis Kondisi dan Pengendalian Bahaya di Bengkel/Laboratorium Sekolah Menengah Kejuruan. Jurnal Pendidikan Teknologi dan Kejuruan (Volume 20, Nomor 2,Oktober 2011). Hlm. 103-110.

Rachmatiah Siti Salami, Indah. (2015). Kesehatan dan Keselamatan Lingkungan Kerja.Yogyakarta:Gadjah Mada University Press

Ridley, John. (2008). Kesehatan danKeselamatan Kerja: Ikhtisar(Edisi 3). Jakarta: Erlangga

Sarwono, Jonathan. (2006). Metode Penelitian Kuantitatif dan Kualitatif. Yogyakarta:GrahaIlmu

SCORE. (2013). Keselamatan dan Kesehatan Kerja di Tempat Kerja Sarana untuk Produktivitas ILO 2013.(AlihBahasaSCORE).Jakarta:SCORE

Sugiyono. (2013). Metode Penelitian Kuantitatif, Kualitatif, dan kombinasi (Mixed Methods).Bandung:Alfabeta

Suharsaputra,Uhar.(2012).Metode Penelitian Kuantitatif, Kualitatif,dan Tindakan. Bandung:Refika Aditama

Suma’mur, P.K.(1981). Keselamatan Kerja & Pencegahan Kecelakaan. Jakarta: GunungAgung

Sunaryo,wowo.(2015).Mencegah Kecelakaan Kerja.Bandung:Rosda

Suwardi dan Daryanto. (2018). Pedoman Praktis K3LH Keselamatan dan Kesehatan Kerjadan Lingkungan Hidup.Malang:GavaMedia111

TIM. (2014). Buku Ajar Keselamatan dan Kesehatan Kerja (K3) Fakultas Teknik Universitas Negeri Yogyakarta.Yogyakarta:UNYPress

Vaughan, Emmet J. 1978. Fundamental of Risk and insurance. 2. New York: John Willey.nd

Veithzal, Rivai. 2004. Manajemen Sumber Daya Manusia untuk Perusahaan. Jakarta:Rajagrafindo Persada.113

William.David C. (1998). Naturalistic Inqury Materials, FPS-IKIP, Bandung

Downloads

Published

2023-08-31

How to Cite

Khairus, P., Indrawan, E., Adri, J., & Irzal, I. (2023). Analysis of job risk at machine workshop. Mechanical Engineering Education Journal, 1(3), 89–92. https://doi.org/10.24036/meej.v1i3.37

Issue

Vol. 1 No. 3 (2023): Regular Issue

Section

Articles

License

Copyright (c) 2024 Putra Khairus, Eko Indrawan, Junil Adri, Irzal Irzal

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Most read articles by the same author(s)